●This 32-bit noninverting bus transceiver uses two separate, configurable power-supply rails. The SN74AVC32T245 device is optimized to operate with VCCA/VCCB set from 1.4 V to 3.6 V. It is operational with VCCA/VCCB as low as 1.2 V. The A port is designed to track VCCA. VCCA and accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB and accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.2 V, 1.5V, 1.8 V, 2.5 V, and 3.3 V voltage nodes.
●The SN74AVC32T245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can disable the outputs so the buses are effectively isolated.
●The SN74AVC32T245 is designed so that the control pins (1DIR, 2DIR, 3DIR, 4DIR, 1OE, 2OE, 3OE, and 4OE) are supplied by VCCA.
●This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
●The VCC isolation feature ensures that if either VCC input is at GND, then both ports are in the high-impedance state.
●To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
● Member of the Texas Instruments Widebus+™
●Family
● Control Inputs VIH/VIL Levels Referenced to VCCA
●Voltage
● VCC Isolation Feature If Either VCC Input is at
●GND, Both Ports are in the High-Impedance State
● Overvoltage-Tolerant Inputs/Outputs Allow Mixed-
●Voltage-Mode Data Communications
● Fully Configurable Dual-Rail Design Allows Each
●Port to Operate Over Full 1.2 V to 3.6 V Power-
●Supply Range
● Ioff Supports Partial-Power-Down Mode Operation
● 4.6 V Tolerant I/Os
● Max Data Rates
● 380 Mbps (1.8 V to 3.3 V Level-Shifting)
● 200 Mbps (< 1.8 V to 3.3 V Level-Shifting)
● 200 Mbps (Translate to 2.5 V or 1.8 V)
● 150 Mbps (Translate to 1.5 V)
● 100 Mbps (Translate to 1.2 V)
● Latch-Up Performance Exceeds 100 mA Per
●JESD 78, Class II
● ESD Protection Exceeds JESD 22
● 4000 V Human-Body Model (A114-A)
● 200 V Machine Model (A115-A)
● 1000 V Charged-Device Model (C101)
●## Applications
● Personal Electronics
● Industrial
● Enterprise
● Telecom
●All trademarks are the property of their respective owners.