SN74CB3T16210DGGR Datasheet PDF - TI

●The SN74CB3T16210DGGR is a high-speed TTL-compatible FET Bus Switch with low ON-state resistance (ron), allowing for minimal propagation delay. The device fully supports mixed-mode signal operation on all data I/O ports by providing voltage translation that tracks VCC. It supports systems using 5V TTL, 3.3V LVTTL and 2.5V CMOS switching standards, as well as user-defined switching levels. It is organized as two 10-bit bus switch with separate OE inputs. It can be used as two 10-bit bus switches or as one 20-bit bus switch. When OE\ is low, the associated 10-bit bus switch is ON and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\ is high, the associated 10-bit bus switch is OFF and a high-impedance state exists between the A and B ports. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down.

● Output voltage translation tracks VCC

● Supports mixed-mode signal operation on all data I/O ports

● Bidirectional data flow with near-zero propagation delay

● Low ON-state resistance (ron) characteristics

● Low input/output capacitance minimizes loading

● Data and control inputs provide undershoot clamp diodes

● Low power consumption

● Ioff Supports partial-power-down mode operation

● Latch-up performance exceeds 250mA per JESD 17

● Green product and no Sb/Br