SN74HC125N Datasheet PDF - TI

●The SN74HC125N is a quadruple Bus Buffer Gate features independent line drivers with 3-state outputs. It is designed for 2 to 6V VCC operation. Each output is disabled when the associated output-enable (OE) input is high. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.

● High-current 3-state outputs interface directly with system bus or can drive up to 15 LSTTL loads

● 80µA maximum ICC low power consumption

● 11ns typical Propagation delay (tpd)

● ±6mA Output drive at 5V

● 1µA maximum Low input current