SN74HCT125 Datasheet PDF - TI

●These bus buffer gates feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE)\ input is high.

●To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

● Operating Voltage Range of 4.5 V to 5.5 V

● High-Current Outputs Drive Up To 15 LSTTL Loads

● Low Power Consumption, 80-µA Max ICC

● Typical tpd = 12 ns

● ±6-mA Output Drive at 5 V

● Low Input Current of 1 µA Max

● Inputs Are TTL-Voltage Compatible

● High-Current 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers