SN74HCT125N Datasheet PDF - TI

●The SN74HCT125N is a quadruple Bus Buffer Gate features independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE)\ input is high. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.

● Inputs are TTL-voltage compatible

● High-current 3-state outputs drive bus lines or buffer memory address registers

● High-current outputs drive up to 15 LSTTL loads

● 80µA maximum ICC low power consumption

● 12ns typical Propagation delay (tpd)

● ±6mA Output drive at 5V

● 1µA maximum Low input current