SN74LVC574ADWR Datasheet PDF - TI

●The SN74LVC574ADWR is an octal edge-triggered D-type Flip-flop with 3-state outputs. It is designed for 1.65 to 3.6V VCC operation. It is designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. On the positive transition of the clock input, the Q outputs are set to the logic levels at the data (D) inputs. A buffered OE\ input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pull-up components. OE\ does not affect the internal operations of the flip-flops.

● 7ns at 3.3V Maximum tpd

● Support mixed-mode signal operation on all ports

● Ioff Supports partial-power-down mode operation

● Latch-up performance exceeds 250mA per JESD 17

● Green product and no Sb/Br