SN751177NSR Datasheet PDF - TI

●The SN751177NSR is a dual Differential Driver and Receiver designed for balanced multipoint bus transmission at rates up to 10Mbps. It is designed to improve the performance of full-duplex data communications over long bus lines and meet ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU recommendations V.10 and V.11. The driver outputs provide limiting for both positive and negative currents and thermal-shutdown protection from line-fault conditions on the transmission bus line. The receiver features high input impedance of at least 12kR, an input sensitivity of ±200mV over a common-mode input voltage range of -12 to 12V and typical input hysteresis of 50mV. Failsafe design ensures that if the receiver inputs are open, the receiver outputs always will be high.

● Driver positive-and negative-current limiting

● Thermal shutdown protection

● 3-state Output driver

● 3-state Output receiver

● 10Mbps Maximum signalling rate

● 2kV HBM ESD

● 32 Number of nodes

● Green product and no Sb/Br