SN75HVD1176D Datasheet PDF - TI

●The SN75HVD1176D is a half-duplex Differential Transceiver optimized for use in PROFIBUS (EN 50170) applications. The driver output differential voltage exceeds the PROFIBUS requirements of 2.1V with a 54R load. A signalling rate of up to 40Mbps allows technology growth to high data-transfer speeds. The low bus capacitance provides low signal distortion. The device meets or exceeds the requirements of ANSI standard TIA/EIA-485-A (RS-485) for differential data transmission across twisted-pair networks. The driver outputs and receiver inputs are tied together to form a half-duplex bus port with one-fifth unit load, which allows up to 160 nodes on a single bus. The receiver output stays at logic high when the bus lines are shorted, left open or when no driver is active. The driver outputs are in high impedance when the supply voltage is below 2.5V to prevent bus disturbance during power cycling or during live insertion to the bus.

● Failsafe receiver (bus open, bus shorted and bus idle)

● Low skew during output transitions and driver enabling and disabling

● Short-circuit current limit

● Hot swap capable

● Thermal shutdown protection

● Up to 160 transceivers on a bus

● ESD protection exceeds ±10kV HBM

● Common-mode rejection up to 50MHz

● 10pF Maximum low bus capacitance

● Green product and no Sb/Br