●Introduction
●The ST10F276 is a derivative of the STMicroelectronics ST10 family of 16-bit single-chip CMOS microcontrollers. It combines high CPU performance (up to 32 million instructions per second) with high peripheral functionality and enhanced I/O-capabilities. It also provides on-chip high-speed single voltage Flash memory, on-chip high-speed RAM, and clock
●generation via PLL.
●Features
●■ Highly performant 16-bit CPU with DSP functions
●– 31.25ns instruction cycle time at 64MHz max CPU clock
●– Multiply/accumulate unit (MAC) 16 x 16-bit multiplication, 40-bit accumulator
●– Enhanced boolean bit manipulations
●– Single-cycle context switching support
●■ On-chip memories
●– 512 Kbyte Flash memory (32-bit fetch)
●– 320 Kbyte extension Flash memory (16-bit fetch)
●– Single voltage Flash memories with erase/program controller and 100K erasing/programming cycles.
●– Up to 16 Mbyte linear address space for code and data (5 Mbytes with CAN or I2C)
●– 2 Kbyte internal RAM (IRAM)
●– 66 Kbyte extension RAM (XRAM)
●■ External bus
●– Programmable external bus configuration & characteristics for different address ranges
●– Five programmable chip-select signals
●– Hold-acknowledge bus arbitration support
●■ Interrupt
●– 8-channel peripheral event controller for single cycle interrupt driven data transfer
●– 16-priority-level interrupt system with 56 sources, sampling rate down to 15.6ns
●■ Timers
●– Two multi-functional general purpose timer units with 5 timers
●■ Two 16-channel capture / compare units
●■ 4-channel PWM unit + 4-channel XPWM
●■ A/D converter
●– 24-channel 10-bit
●–3µs minimum conversion time
●■ Serial channels
●– Two synch. / asynch. serial channels
●– Two high-speed synchronous channels
●–One I2C standard interface
●■ 2 CAN 2.0B interfaces operating on 1 or 2 CAN busses (64 or 2x32 message, C-CAN version)
●■ Fail-safe protection
●– Programmable watchdog timer
●– Oscillator watchdog
●■ On-chip bootstrap loader
●■ Clock generation
●– On-chip PLL with 4 to 12 MHz oscillator
●– Direct or prescaled clock input
●■ Real time clock and 32kHz on-chip oscillator
●■ Up to 111 general purpose I/O lines
●– Individually programmable as input, output or special function
●– Programmable threshold (hysteresis)
●■ Idle, power down and stand-by modes
●■ Single voltage supply: 5V ±10% (embedded regulator for 1.8 V core supply)
Part 3D Model
