ST1480AC Datasheet PDF - ST Microelectronics

●The ST1480Ax is ±15 kV ESD protected, 3.3 V low power transceiver for RS-485 and RS-422 communications. The device contains one driver and one receiver in half duplex configuration.

●The ST1480Ax transmits and receives at a guaranteed data rate of at least 12 Mbps.

●All transmitter outputs and receiver inputs are protected to ±15 kV using Human Body Model.

●Driver is short-circuit current limited and is protected against excessive power dissipation by

●thermal shutdown circuitry that places the driver outputs into a high-impedance state.

●The ST1480Ax input has a true fail-safe feature that guarantees a logic high output if both inputs are open circuit, shorted together or in the presence of a termination with no signal on the bus.

●Key Features

● ESD protection

● ±15 kV human body model

● ±8 kV IEC 1000-4-2 contact discharge

● Operates from a single 3.3 V supply - no charge pump required

● Interoperable with 5 V logic

● 1 μA low current shutdown mode max

● Guaranteed 12 Mbps data rate

● -7 to 12 common mode input voltage range

● Half duplex versions available

● Industry standard 75176 pinout

● Current limiting and thermal shutdown for driver overload protection

● Guaranteed high receiver output state for floating, shorted or terminated inputs with no signal present

● Allows up to 64 transceivers on the bus