ST7538Q Datasheet PDF - ST Microelectronics

●Description

●The ST7538Q is a Half Duplex synchronous/asynchronous FSK Modem designed for power line communication network applications. It operates from a single supply voltage and integrates a line driver and two linear regulators for 5V and 3.3V. The device operation is controlled by means of an internal register, programmable through the synchronous serial interface. Additional functions as watchdog, clock output, output voltage and current control, preamble detection, time-out, band in use are included. Realized in Multipower BCD5 technology that allows to integrate DMOS, Bipolar and CMOS structures in the same chip.

●General features

●■ Half duplex frequency shift keying (FSK) transceiver

●■ Integrated power line driver with programmable voltage and current control

●■ Programmable interface:

●   – Synchronous

●   – Asynchronous

●■ Single supply voltage (from 7.5 up to 12.5V)

●■ Very low power consumption (Iq = 5mA)

●■ Integrated 5V voltage regulator (up to 50mA) with short circuit protection

●■ Integrated 3.3V voltage regulator (up to 50mA) with short circuit protection

●■ 3.3V or 5V digital supply

●■ 8 programmable transmission frequencies

●■ Programmable baud rate up to 4800BPS

●■ Receiving sensitivity up to 250µVrms

●■ Suitable to application in accordance with EN50065 CENELEC specifications

●■ Carrier or preamble detection

●■ Band in use detection

●■ Programmable 24 or 48 bit register with security checksum

●■ Mains zero crossing detection and synchronization

●■ Watchdog timer

●■ Output voltage freeze

●■ 8 or 16 bit header recognition

●■ UART/SPI host interface

●■ ST7537 compatible