●STR91xFA is a series of ARM®-powered microcontrollers which combines a 16/32-bit ARM966E-S RISC processor core, dual-bank Flash memory, large SRAM for data or code, and a rich peripheral set to form an ideal embedded controller for a wide variety of applications such as point-of-sale terminals, industrial automation, security and surveillance, vending machines, communication gateways, serial protocol conversion, and medical equipment. The ARM966E-S core can perform single-cycle DSP instructions, good for speech processing, audio algorithms, and low-end imaging.
●Key Features
● 16/32-bit 96 MHz ARM9E based MCU
● ARM966E-S™ RISC core: Harvard archi-tecture, 5-stage pipeline, Tightly-Coupled Memories (SRAM and Flash)
● STR91xFA implementation of core adds high-speed burst Flash memory interface, instruction prefetch queue, branch cache
● Up to 96 MIPS directly from Flash memory
● Single-cycle DSP instructions supported
● Binary compatible with ARM7 code
● Dual burst Flash memories, 32-bits wide
● 256 KB/512 KB/1 MB/2 MB main Flash
● 32 KB/128 KB secondary Flash
● Sequential Burst operation up to 96 MHz
● 100 K min erase cycles, 20 yr min retention
● SRAM, 32-bits wide
● 64K or 96K bytes, optional battery backup
● 9 programmable DMA channels
● Clock, reset, and supply management
● Internal oscillator operating with external 4-25 MHz crystal
● Internal PLL up to 96 MHz
● Real-time clock provides calendar functions, tamper, and wake-up functions
● Reset Supervisor monitors supply voltage, watchdog, wake-up unit, external reset
● Brown-out monitor
● Run, Idle, and Sleep Mode as low as 50 uA
● Vectored interrupt controller (VIC)
● 32 IRQ vectors, 30 interrupt pins
● Branch cache minimizes interrupt latency
● 8-channel, 10-bit A/D converter (ADC)
● 0 to 3.6 V range, 0.7 usec conversion
● 10 Communication interfaces
● 10/100 Ethernet MAC with DMA and MII
● USB Full-speed (12 Mbps) slave device
● CAN interface (2.0B Active)
● 3 16550-style UARTs with IrDA protocol
● 2 Fast I2C, 400 kHz
● 2 channels for SPI, SSI™, or MICROWIRE™
● External Memory Interface (EMI)
● 8- or 16-bit data, up to 24-bit addressing
● Static Async modes for LQFP128
● Additional burst synchronous modes for LFBGA144
● Up to 80 I/O pins (muxed with interfaces)
● 16-bit standard timers (TIM)
● 4 timers each with 2 input capture, 2 output compare, PWM and pulse count modes
● 3-Phase induction motor controller (IMC)
● JTAG interface with boundary scan
● Embedded trace module (ARM® ETM9™)
Part 3D Model
