●DESCRIPTION
●The TAS5717/TAS5719 is a 10-W/15-W, efficient, digital audio-power amplifier for driving stereo bridge-tied speakers. One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers.
●FEATURES
●• Audio Input/Output
● – TAS5717 Supports 2×10 W and TAS5719 Supports 2×15 W Output
● – Wide PVDD Range, From 4.5 V to 26 V
● – Efficient Class-D Operation Eliminates Need for Heatsinks
● – Requires Only 3.3 V and PVDD
● – One Serial Audio Input (Two Audio Channels)
● – I2C Address Selection via PIN (Chip Select)
● – Supports 8-kHz to 48-kHz Sample Rate (LJ/RJ/I2S)
● – External Headphone-Amplifier Shutdown Signal
● – Integrated CAP-Free Headphone Amplifier
● – Stereo Headphone (Stereo 2-V RMS Line Driver) Outputs
●• Audio/PWM Processing
● – Independent Channel Volume Controls With 24-dB to Mute
● – Programmable Two-Band Dynamic Range Control
● – 14 Programmable Biquads for Speaker EQ
● – Programmable Coefficients for DRC Filters
● – DC Blocking Filters
● – 0.125-dB Fine Volume Support
●• General Features
● – Serial Control Interface Operational Without MCLK
● – Factory-Trimmed Internal Oscillator for Automatic Rate Detection
● – Surface Mount, 48-Pin, 7-mm × 7-mm HTQFP Package
● – AD, BD, and Ternary PWM-Mode Support
● – Thermal and Short-Circuit Protection
●• Benefits
● – EQ: Speaker Equalization Improves Audio Performance
● – DRC: Dynamic Range Compression. Can Be Used As Power Limiter. Enables Speaker Protection, Easy Listening, Night-Mode Listening
● – DirectPath Technology: Eliminates Bulky DC Blocking Capacitors
● – Stereo Headphone/Stereo Line Drivers:
● Adjust Gain via External Resistors,
● Dedicated Active Headpone Mute Pin, High
● Signal-to-Noise Ratio
● – Two-Band DRC: Set Two Different Thresholds for Low- and High-Frequency Content
