TAS5731MPHP Datasheet PDF - TI

●The TAS5731MPHP is a 30W efficient digital-audio stereo Power Amplifier for driving stereo bridge-tied speakers. One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers. The TAS5731M is a slave-only device receiving all clocks from external sources. The TAS5731M operates with a PWM carrier between a 384kHz switching rate and a 352kHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20Hz to 20kHz.

● Direct connect to digital processor

● High output power from a standard supply

● Eliminates the need for heat sink

● Advanced processing improves audio experience

● Up to 90% efficient operation

● Single-device 2.1 support (2 x SE + 1 xBTL)

● Speaker EQ (8 BQ per channel), 2x DRCs

● Pin-to-pin compatible with the TAS5727 and TAS5731

● 30W Stereo, 8R/24V (THD+N=10%)

● Green product and no Sb/Br