TJA1043T,112 Datasheet PDF - NXP

●The TJA1043T,112 is a high-speed CAN transceiver IC provides an interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller.

● Fully ISO 11898-2:2003 and ISO 11898-5:2007 Compliant

● Loop delay symmetry timing enables communication at data rates up to 2Mbps in the CAN FD fast phase

● Suitable for 12 and 24V Systems

● Low Electromagnetic Emission (EME) and High Electromagnetic Immunity (EMI)

● VIO Input Allows for Direct Interfacing with 3 and 5V Microcontrollers

● SPLIT Voltage Output for Stabilizing Recessive Bus Level

● Listen-only Mode for Node Diagnosis and Failure Containment

● AEC-Q100 Qualified

● Very Low Current Standby and Sleep Modes, with Local and Remote Wake-up

● Capability to Power Down Entire Node While Supporting Local, Remote and Host Wake-up

● Wake-up Source Recognition

● Transceiver Disengages from Bus (Zero Load) when VBAT Absent

● Functional Behaviour Predictable Under All Supply Conditions

● High ESD Handling Capability on Bus Pins

● Bus Pins and VBAT Protected Against Transients in Automotive Environments

● Transmit Data (TXD) Dominant Time-out Function with Diagnosis

● TXD-to-RXD Short-circuit Handler with Diagnosis

● Thermal Protection with Diagnosis

● Under-voltage Detection and Recovery on Pins VCC, VIO and VBAT

● Bus line Short-circuit Diagnosis