TMP421-Q1 Datasheet PDF - TI

●The TMP421-Q1, TMP422-Q1, and TMP423-Q1 devices are single, dual, and triple remote, automotive-qualified temperature sensor monitors with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or field-programmable gate arrays (FPGAs).

●Remote accuracy is ±1°C for multiple device manufacturers, with no calibration needed. The two-wire serial interface accepts SMBus write byte, read byte, send byte, and receive byte commands to configure the device.

●The TMP421-Q1, TMP422-Q1, and TMP423-Q1 include series resistance cancellation, programmable non-ideality factor, wide remote temperature measurement range (up to +150°C), and diode fault detection.

●The TMP421-Q1, TMP422-Q1, and TMP423-Q1 are all available in an 8-pin SOT-23 package.

● AEC-Q100 Qualified with the Following Results

● Temperature Grade 1: –40°C to +125°C

● Device HBM ESD Classification Level 2

● Device CDM ESD Classification Level C5

● SOT23-8 Package

● ±1°C Remote Diode Sensor (Maximum)

● ±1.5°C Local Temperature Sensor (Maximum)

● Series Resistance Cancellation

● n-Factor Correction

● Two-Wire I2C or SMBus™ Compatible Serial Interface

● Multiple Interface Addresses

● Diode Fault Detection

● RoHS Compliant and No Sb/Br