TOP265KG Datasheet PDF - Power Integrations

●The TOP265KG is an integrated Offline Switcher with EcoSmart™ Technology for highly efficient power supplies. TOPSwitch-JX incorporates a 725V power MOSFET and high-voltage switched current source, multi-mode PWM control, oscillator, fault protection and other control circuitry onto a monolithic device. It is an integrated switched mode power supply chip that converts a current at the control input to a duty cycle at the open drain output of a high-voltage power MOSFET. During normal operation the duty cycle of the power MOSFET decreases linearly with increasing CONTROL pin current. It features the high-voltage start-up, the cycle-by-cycle current limiting, loop compensation circuitry, auto-restart and thermal shutdown, the TOP264 incorporates many additional functions that reduce system cost, increase power supply performance and design flexibility. A patented high-voltage CMOS technology allows both the high-voltage power MOSFET and all the low voltage control circuitry.

● Energy efficient over entire load range

● Multi-mode PWM control maximizes efficiency at all loads

● Accurate programmable current limit

● Optimized line feed-forward for line ripple rejection

● Frequency jittering reduces EMI filter

● Fully integrated soft-start for minimum start-up stress

● Simplifies meeting design derating requirements

● User programmable for hysteretic/latching shutdown

● Simple fast AC reset

● Primary or secondary sensed

● Line undervoltage detection prevents turn-OFF glitches

● Line overvoltage shutdown extends line surge withstand

● Accurate thermal shutdown with large hysteresis

● Input pin for external current limit adjustment remote ON/OFF and device reset

● Input pin for selecting switching frequency 132kHz if connected to SOURCE pin

● Output MOSFET source connection for high-voltage power return