TPA3001D1 Datasheet PDF - TI

●The TPA3001D1 (sometimes referred to as TPA3001) is a 20-W monaural bridge-tied load (BTL) class-D audio power amplifier (class-D amp) with high efficiency, eliminating the need for heat sinks. The TPA3001D1 can drive 4- or 8- speakers with only a ferrite bead filter required to reduce EMI.

●The gain of the amplifier is controlled by two input terminals, GAIN1 and GAIN0. This allows the amplifier to be configured for a gain of 12, 18, 23.6, or 36 dB. The differential input stage provides high common-mode rejection and improved power-supply rejection.

●The amplifier also includes depop circuitry to reduce the amount of pop at power-up and when cycling SHUTDOWN.

●The TPA3001D1 (TPA3001) is available in the 24-pin thermally enhanced TSSOP package (PWP), which eliminates the need for an external heat sink.

● 20 W Into 8- Load From 18-V Supply (10% THD+N)

● Short-Circuit Protection (Short to VCC, Short to GND,

●Short Between Outputs)

● Third-Generation Modulation Technique:

● Replaces Large LC Filter With Small, Low-Cost Ferrite

●Bead Filter in Most Applications

● Improved Efficiency

● Improved SNR

● Low Supply Current: 8 mA Typ at 12 V

● Shutdown Control: < 1 µA Typ

● Space-Saving, Thermally-Enhanced PowerPAD™ Packaging

● APPLICATIONS

● LCD Monitors/TVs

● Hands-Free Car Kits

● Powered Speakers

●PowerPAD Is a trademark of Texas Instruments.

●All other trademarks are the property of their respective owners