TPA3116D2DAD Datasheet PDF - TI

●The TPA3116D2DAD is a 50W Stereo (BTL) Class-D Audio Amp with SpeakerGuard™ for driving speakers up to 100W/2R in mono. The high power TPA3116D2 does 2 x 50W/4R with a small heat-sink attached to its top side PowerPAD. All three devices share the same footprint enabling a single PCB to be used across different power levels. The TPA3116D2DAD advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences; this is achieved together with an option of either master or slave option, making it possible to synchronize multiple devices. The TPA3116D2DAD devices are fully protected against faults with short-circuit protection and thermal protection as well as overvoltage, under-voltage and DC protection.

● 2 x 50W into a 4R BTL load at 21V

● Efficient class-D operation

● >90% Power efficiency combined with low idle loss greatly reduces heat sink size

● Advanced modulation schemes

● AM avoidance

● Master and slave synchronization

● Up to 1.2MHz switching frequency

● Feedback power-stage architecture with high PSRR reduces PSU requirements

● Programmable power limit

● Differential and single-ended inputs

● Stereo and mono mode with single-filter mono configuration

● Single power supply reduces component count

● Integrated self-protection - overvoltage, under-voltage, over-temperature, DC-detect, short-circuit

● Green product and no Sb/Br

●IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.