●DESCRIPTION/ORDERING INFORMATION
●The power supply provides regulated 5-V output to power the system microcontroller and drive eight low-side switches. The ac zero-detect circuitry is monitoring the crossover voltage of the mains ac supply. The resultant signal is a low-frequency clock output on the ZVS terminal, based on the ac-line cycle. This information allows the microcontroller to reduce in-rush current by powering loads on the ac-line peak voltage.
●A serial communications interface controls the eight low-side outputs; each output has an internal snubber circuit to absorb the energy in the inductor at turn OFF. Alternatively, the system can use a fly-back diode to VIN to help recirculate the energy in an inductive load at turn OFF.
●FEATURES
●• Eight Low-Side Drivers With Internal Clamp for Inductive Loads and Current Limiting for Self Protection
● – Seven Outputs Rated at 150 mA and Controlled Through Serial Interface
● – One Output Rated at 150 mA and Controlled Through Serial Interface and Dedicated Enable Pin
●• 5-V ± 5% Regulated Power Supply With 200-mA Load Capability at VIN Max of 18 V
●• Internal Voltage Supervisory for Regulated Output
●• Serial Communications for Control of Eight Low-Side Drivers
●• Enable/Disable Input for OUT1
●• 5-V or 3.3-V I/O Tolerant for Interface to Microcontroller
●• Programmable Power-On Reset Delay Before RST Asserted High, Once 5 V Is Within Specified Range (6 ms Typ)
●• Programmable Deglitch Timer Before RST Asserted Low (40 µs Typ)
●• Zero-Voltage Detection Signal
●• Thermal Shutdown for Self Protection
●APPLICATIONS
●• Electrical Appliances
● – Air Conditioning Units
● – Ranges
● – Dishwashers
● – Refrigerators
● – Microwaves
● – Washing Machines
●• General-Purpose Interface Circuits, Allowing Microcontroller Interface to Relays, Electric Motors, LEDs, and Buzzers
Part 3D Model
