TPS53353EVM-744 Datasheet PDF - TI

●The TPS53353EVM-744 is an evaluation module for TPS53353 is a D-CAP mode, 20A, synchronous buck converter with integrated MOSFETs. It provides a fixed 1.5V output at up to 20A from a 12V input bus. The evaluation module is designed to use a regulated 12V bus to produce a regulated 1.5V output at up to 20A of load current. The evaluation module is designed to demonstrate the TPS53353 in a typical low voltage application while providing a number of test points to evaluate the performance of the TPS53353.

● 20A dc, steady state output current

● Support prebias output voltage start up

● J5 for selectable switching frequency setting

● J4 for selectable soft start time

● J2 for enable function

● J6 for auto skip and forced CCM selection

● Convenient test points for probing critical waveforms

●This EVM should be operated within the input voltage range of 8V to 14V and the output voltage range of 0.6V to 5.5V. Exceeding the specified input voltage range may cause damage to the EVM.