TPS54315PWPR Datasheet PDF - TI

●DESCRIPTION

●As members of the SWIFT family of dc/dc regulators, the TPS54311, TPS54312, TPS54313, TPS54314, TPS54315 and TPS54316 low-input-voltage high-output current synchronous-buck PWM converters integrate all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that provides high  performance under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally and externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply

●sequencing.

●FEATURES

●60-mΩMOSFET Switches for High Efficiency at 3-A Continuous Output Source or Sink Current

●0.9-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V and 3.3-V Fixed Output Voltage Devices With 1% Initial Accuracy

●Internally Compensated for Low Parts Count

●Fast Transient Response

●Wide PWM Frequency: Fixed 350 kHz, 550 kHz, or Adjustable 280 kHz to 700 kHz

●Load Protected by Peak Current Limit and Thermal Shutdown

●Integrated Solution Reduces Board Area and Total Cost

●APPLICATIONS

●Low-Voltage, High-Density Systems With Power Distributed at 5 V or 3.3 V

●Point of Load Regulation for High Performance DSPs, FPGAs, ASICs, and Microprocessors

●Broadband, Networking and Optical Communications Infrastructure

●Portable Computing/Notebook PCs