TPS54418ARTER Datasheet PDF - TI

●TheTPS54418A device is a full featured 6-V, 4-A, synchronous, step-down, current mode converter with two integrated MOSFETs.

●The TPS54418A device enables small designs by integrating the MOSFETs, implementing current mode control to reduce external component count, reducing inductor size by enabling up to 2-MHz switching frequency, and minimizing the device footprint with a small, 3 mm × 3 mm, thermally enhanced, QFN package.

●The TPS54418A device provides accurate regulation for a variety of loads with an accurate ±1% voltage reference (VREF) over temperature.

●Efficiency is maximized through the integrated 30-mΩ MOSFETs and a 350-&mciro;A typical supply current. Using the enable pin, shutdown supply current is reduced to 2 µA by entering a shutdown mode.

●Undervoltage lockout is internally set at 2.6 V, but can be increased by programming the threshold with a resistor network on the enable pin. The output voltage startup ramp is controlled by the soft-start pin. An open-drain power good signal indicates the output is within 93% to 107% of its nominal voltage. Frequency fold back and thermal shutdown protects the device during an overcurrent condition.

●Use SwitcherPro™ power supply design software to create, manage and share custom power supply designs for the TPS54418A by clicking here.

●For more SWIFT™ documentation, see the TI website at www.ti.com/swift.