●The TPS54560-Q1 is a 60-V, 5-A, step-down regulator with an integrated high side MOSFET. The device survives load dump pulses up to 65 V per ISO 7637. Current mode control provides simple external compensation and flexible component selection. A low-ripple, pulse-skip mode reduces the no load supply current to 146 µA. Shutdown supply current is reduced to 2 µA when the enable pin is pulled low.
●Undervoltage lockout is internally set at 4.3 V but can be increased using an external resistor divider at the enable pin. The output voltage start-up ramp is internally controlled to provide a controlled start-up and eliminate overshoot.
●A wide adjustable frequency range allows either efficiency or external component size to be optimized. Output current is limited cycle-by-cycle. Frequency foldback and thermal shutdown protects internal and external components during an overload condition.
●The TPS54560-Q1 is available in an 8-pin thermally enhanced HSOIC PowerPAD package.
● Qualified for Automotive Applications
● AEC-Q100 Qualified With the Following Results:
● Device Temperature Grade 1: 40°C to 125°C
●Ambient Operating Temperature Range
● Device HBM ESD Classification Level H1C
● Device CDM ESD Classification Level C3B
● High Efficiency at Light Loads With Pulse-Skipping
●Eco-Mode™
● 92-mΩ High-Side MOSFET
● 146-µA Operating Quiescent Current and 2-µA
●Shutdown Current
● 100-kHz to 2.5-MHz Adjustable Switching Frequency
● Synchronizes to External Clock
● Low Dropout at Light Loads with Integrated BOOT
●Recharge FET
● Adjustable UVLO Voltage and Hysteresis
● 0.8-V 1% Internal Voltage Reference
● 8-Pin HSOIC with PowerPAD™ Package
● 40°C to 150°C TJOperating Range
● Supported by WEBENCH® Software Tool