●The TPS54618-Q1 device is a full-featured 6-V, 6-A, synchronous step-down current-mode converter with two integrated MOSFETs.
●The TPS54618-Q1 enables small designs by integrating the MOSFETs, implementing current-mode control to reduce external component count, reducing inductor size by enabling up to 2-MHz switching frequency, and minimizing the IC footprint with a small, 3-mm × 3-mm, thermally-enhanced WQFN package.
●The TPS54618-Q1 provides accurate regulation for a variety of loads with an accurate ±1% voltage reference (VREF) over temperature.
●Efficiency is maximized through the integrated 12-mΩ MOSFETs and 515-µA typical supply current. Using the enable pin, shutdown supply current is reduced to 5.5-µA by entering a shutdown mode.
●Undervoltage lockout is internally set at 2.6 V, but can be increased by programming the threshold with a resistor network on the enable pin. The output-voltage startup ramp is controlled by the slow-start pin. An open-drain power-good signal indicates the output is within 93% to 107% of its nominal voltage.
●Frequency foldback and thermal shutdown protect the device during an overcurrent condition.
●TPS54618-Q1 is supported in the SwitcherPro software tool at www.ti.com/switcherpro.
●For more SWIFT documentation, see the TI website at www.ti.com/swift.
● Qualified for Automotive Applications
● AEC Q-100 Qualified With the Following Results:
● Device Temperature Grade 1: Ambient
●Operating Temperature Range of –40°C to
●125°C
● Device HBM ESD Classification Level H2
● Device CDM ESD Classification Level C4B
● Two 12-mΩ (Typical) MOSFETs for High
●Efficiency at 6-A Loads
● 300-kHz to 2-MHz Switching Frequency
● 0.8-V ±1% Voltage Reference Over Temperature
●(–40°C to 150°C)
● Synchronizes to External Clock
● Adjustable Slow-Start and Sequencing
● UV and OV Power-Good Output
● Thermally-Enhanced 3-mm × 3-mm, 16-pin
●WQFN Package
