TPS56221DQPT Datasheet PDF - TI

●The TPS56221DQPT is a high-efficiency and high-current synchronous Buck Converter designed to operate from a supply of 4.5 to 14V. The device can produce an output voltage as low as 0.6V at loads up to 25A. Integrated NexFET™ power MOSFETs provide a small footprint and ease of use. The device implements a voltage-mode control with voltage feed-forward compensation that responds instantly to input voltage change. The device offers design flexibility with a variety of user programmable functions, including soft-start, overcurrent protection (OCP) levels and loop compensation. OCP levels are programmed by a single external resistor connected from the ILIM pin to the circuit ground. During the initial power-ON sequence, the device enters a calibration cycle, measures the voltage at the ILIM pin and sets an internal OCP voltage level.

● Incorporates power block technology

● High-side and low-side MOSFET RDS(on) sensing

● Programmable soft-start

● Voltage mode control with feed-forward

● Supports pre-biased output

● Thermal shutdown

● 600mV Reference voltage with 1% accuracy