●The TPS57160-Q1 device is a 60-V 1.5-A step-down regulator with an integrated high-side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the no load, input supply current to 116 µA. Using the enable pin, shutdown supply current is reduced to 1.5 µA.
●Undervoltage lockout is set internally at 2.5 V but can be increased using the enable pin. The output voltage startup ramp is controlled by the slow-start pin that can also be configured for sequencing or tracking. An open-drain power-good signal indicates the output is within 92% to 109% of the nominal voltage.
●A wide switching frequency range allows efficiency and external component size to be optimized. Frequency foldback and thermal shutdown protects the part during an overload condition.
●The TPS57160-Q1 device is available in a 10-pin thermally enhanced MSOP-PowerPAD™ (DGQ) or 10-pin VSON (DRC) package. The Z-suffix offers reduced delamination compared to standard device.
● Qualified for Automotive Applications
● 3.5-V to 60-V Input Voltage Range
● 200-mΩ High-Side MOSFET
● High Efficiency at Light Loads With Pulse-
●Skipping Eco-mode™ Control Scheme
● 116-µA Operating Quiescent Current
● 1.5-µA Shutdown Current
● 100-kHz to 2.5-MHz Switching Frequency
● Synchronizes to External Clock
● Adjustable Slow Start/Sequencing
● Undervoltage and Overvoltage Power-good Output
● Adjustable Undervoltage Lockout (UVLO) Voltage
●and Hysteresis
● 0.8-V Internal Voltage Reference
● Supported by SwitcherPro™ Software Tool
●(ti.com/tool/switcherpro)
● Z-Suffix Offers Improved Delamination
