TPS60403QDBVRQ1 Datasheet PDF - TI

●The TPS60403QDBVRQ1 is an unregulated charge-pump Voltage Inverter generates an unregulated negative output voltage from an input voltage ranging from 1.6 to 5.5V. The device is typically supplied by a pre-regulated supply rail of 5/3.3V. Due to its wide input voltage range, two or three NiCd, NiMH or alkaline battery cells, as well as one Li-Ion cell can also power it. Only three external 1µF capacitors are required to build a complete DC/DC charge-pump inverter. Additional board area and component count reduction is achieved by replacing the Schottky diode that is typically needed for start-up into load by integrated circuitry. The TPS6040x can deliver a maximum output current of 60mA with a typical conversion efficiency of greater than 90% over a wide output current range. One device comes with a variable switching frequency to reduce operating current in applications with a wide load range and enables the design with low-value capacitors.

● PowerSave-mode for improved efficiency at low output currents

● Integrated active Schottky-diode for start-up into load

● Only three small 1µF ceramic capacitors needed

● 100µA Device quiescent current

● Green product and no Sb/Br