●The TPS61071-Q1 device provides a power supply solution for products powered by lower-voltage DC rails or a one-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-ion or Li-polymer battery. Output currents can go as high as 75 mA, while using a single-cell alkaline, and discharge down to 0.9 V. The device can also generate 5 V at 200 mA from a 3.3-V rail or a Li-ion battery. The boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency. The maximum peak current in the boost switch is limited typically to a value of 600 mA.
●The TPS61071-Q1 output voltage is programmed by an external resistor divider. To minimize battery drain, disable the converter. During shutdown, the load disconnects from the battery. The device package is a 6-pin thin SOT package (DDC).
● Qualified for Automotive Applications
● AEC-Q100 Qualified With the Following Results:
● Device Temperature Grade 2: –40°C to 105°C
●Ambient Operating Temperature Range
● Device HBM Classification Level 1C
● Device CDM Classification Level C6
● 90% Efficient Synchronous Boost Converter
● 75-mA Output Current at 3.3 V From 0.9-V
●Input
● 150-mA Output Current at 3.3 V From 1.8-V
●Input
● Device Quiescent Current: 19 µA (Typical)
● Input Voltage Range: 0.9 V to 5.5 V
● Adjustable Output Voltage Up to 5.5 V
● Power-Save Mode Version Available for
●Improved Efficiency at Low Output Power
● Load Disconnect During Shutdown
● Overtemperature Protection
● Small 6-Pin Thin SOT Package
Part 3D Model
