TPS61160ADRVT Datasheet PDF - TI

●The TPS61160ADRVT is a white LED Driver with PWM brightness control. The boost converter runs at 600kHz fixed switching frequency to reduce output ripple, improve conversion efficiency and allows for the use of small external components. The default white LED current is set with the external sensor resistor Rset and the feedback voltage is regulated to 200mV. During the operation, the LED current can be controlled by a pulse width modulation (PWM) signal applied to the CTRL pin through which the duty cycle determines the feedback reference voltage. In PWM dimming mode, it does not burst the LED current, therefore, it does not generate audible noises on the output capacitor. For maximum protection, the device features integrated open LED protection that disables the TPS61160A to prevent the output from exceeding the absolute maximum ratings during open LED conditions.

● PWM interface for brightness control

● Built-in soft-start

● Up to 90% efficiency

● 200mV Reference voltage with ±2% accuracy

● Green product and no Sb/Br