●The TPS6224x device is a highly efficient synchronous step-down DC-DC converter. The device provides up to 300-mA output current from a single Li-Ion cell and is ideal for battery powered portable applications like mobile phones and other portable equipment.
●With an wide input voltage range of 2 V to 6 V, the device also supports two- and three-cell alkaline, 3.3-V and 5-V input voltage rails.
●The TPS6224x operates at 2.25-MHz fixed switching frequency and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range.
●The power save mode is optimized for low output voltage ripple. For low-noise applications, the device can be forced into fixed-frequency pulse width modulation (PWM) mode by pulling the MODE pin high. In shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6224x allows the use of small inductors and capacitors to achieve a small solution size.
●The TPS6224x operates over a free-air temperature range of 40°C to 85°C. The device is available in a 5-pin SOT and a 6-pin 2-mm × 2-mm WSON package.
● High Efficiency - Greater Than 94%
● Output Current up to 300 mA
● VIN Range from 2 V to 6 V for Li-ion Batteries With
●Extended Voltage Range
● 2.25-MHz Fixed-Frequency Operation
● Power Save Mode at Light Load Currents
● Output Voltage Accuracy in PWM Mode ±1.5%
● Adjustable Output Voltage from 0.6 V to VIN
● Typical 15-µA Quiescent Current
● 100% Duty Cycle for Lowest Dropout
● Available in a SOT (5) and 2-mm × 2-mm × 0.8-
●mm WSON (6) Package
● Allows <1-mm Solution Height
Part 3D Model
