●The TPS6500xx devices are single-chip power management (PWM) ICs for portable applications. Both devices combine a single step-down converter with two low-dropout (LDO) regulators. The step-down converter enters a low-power mode at light load for maximum efficiency across the widest possible range of load currents. For low-noise applications, the devices can be forced into fixed-frequency PWM through a pin. The step-down converter is small because of its small inductor and capacitors. The step-down converter has power good status output for sequencing. The LDOs can supply 300 mA and operate with an input voltage range from 1.6 V to 6 V. A step-down converter or main battery can power the LDOs directly. The step-down converter and the LDOs have separate voltage inputs that enable maximum design and sequencing flexibility.
●The TPS65001 extends functionality by adding a supply voltage supervisor (SVS). To maximize the flexibility of the SVS, the reset voltage is set with two external resistors and the reset time is set by a small external capacitor. For external control, the SVS can use its active-low manual reset input to connect to a push button.
●The TPS65000 is available in a 16-pin leadless package (3 mm × 3 mm QFN). The TPS65001 is available in a 20-pin leadless package (3 mm × 3 mm QFN).
● Step-Down Converters:
● VIN Range From 2.3 V to 6 V
● Spread Spectrum Clock (SSC) Generation for
●Reduced EMI
● 2.25-MHz Fixed Frequency Operation
● 600-mA or 1-A (TPS650061) Output Current
● Low Dropouts (LDOs):
● VIN Range From 1.6 V to 6 V
● Adjustable Output Voltage
● Up to 300-mA Output Current
● Separate Power Inputs and Enables
● Supply Voltage Supervisor (TPS65001)
● Manual Reset Input for Push Button
● Adjustable Reset Time
● Adjustable Reset Voltage
● 3-mm × 3-mm 16-Pin WQFN (TPS65000)
● 3-mm × 3-mm 20-Pin WQFN (TPS65001)
● APPLICATIONS
● Points-of-Load
● Embedded Processor Power
● Cell Phones
● Smart Phones
● PDAs
● Pocket PCs
● Portable Media Players
●All other trademarks are the property of their respective owners
Part 3D Model
