●The TPS7A60xx-Q1 and TPS7A61xx-Q1 comprise a family of low-dropout linear voltage regulators designed for low power consumption and quiescent current less than 25 µA in light-load applications. These devices feature integrated overcurrent protection and are designed to achieve stable operation even with low-ESR ceramic capacitors. Power-on-reset delay is implemented during device start-up to indicate that the output voltage is stable and in regulation. The power-on-reset delay is fixed (250 µs typical), and can also be programmed by an external capacitor. A low-voltage tracking feature allows for a smaller input capacitor and can possibly eliminate the need of using a boost converter during cold-crank conditions. Because of these features, these devices are well-suited in power supplies for various automotive applications.
● Qualified for Automotive Applications
● AEC-Q100 Test Guidance With the Following Results:
● Device Temperature Grade 1: –40°C to
●125°C Ambient Operating Temperature
● Device HBM ESD Classification Level H3A
● Device CDM ESD Classification Level C6
● Low Dropout Voltage
● 300 mV at IOUT = 150 mA
● 4-V to 40-V Wide Input Voltage Range With up
●to 45-V Transients
● 300-mA Maximum Output Current
● Ultralow Quiescent Current
● IQUIESCENT = 25 µA (Typical) at Light Loads
● ISLEEP < 2 µA When ENABLE = Low
● 3.3-V and 5-V Fixed Output Voltage
● Low-ESR Ceramic Output Stability Capacitor
● Integrated Power-On Reset
● Programmable Delay
● Open-Drain Reset Output
● Integrated Fault Protection
● Short-Circuit and Overcurrent Protection
● Thermal Shutdown
● Low-Input-Voltage Tracking
● Thermally Enhanced Power Package
● 5-pin TO-263 (KTT, D2PAK)
● 5-pin TO-252 (KVU, DPAK)
