●The TPS92511DDA is a 30W Anode Capable Constant Current Buck LED Driver for driving a single LED string with current up to 0.5A and efficiency up to 95%. Only 5 external components are required for basic operation and single layer PCB layout is feasible because of the integration of an N-MOSFET, no external current sensing resistor, no external compensation and the proper terminal assignment. A high-value external resistor programs the LED current so that fine tuning of the LED current can be achieved. Another high-value external resistor programs a constant switching frequency from 50 to 500kHz. EMI design becomes easier as a result of constant switching frequency. By adding simple external circuits, the device can handle applications with even higher input voltages. It applies a floating buck topology with a low-side N-channel power MOSFET, which does not need boot-strapping capacitor.
● Requires no external current sensing resistor
● Requires no external loop compensation
● Ease of use, needs minimum 5 components
● 1000:1 Contrast ratio feasible
● Single layer PCB feasible
● Can work as high voltage buck regulator
● Can work as linear current shunt regulator
● Integrated low-side N-channel MOSFET
● LED current programmable up to 0.5A
● Typically ±3.6% LED current accuracy
● Switching frequency programmable from 50 to 500kHz
● Current limit protection
● VCC under-voltage lock-out
● Thermal shutdown protection
● Support analogue dimming and thermal foldback
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
Part 3D Model
