TS3USB30 Datasheet PDF - TI

●The TS3USB30 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (955 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).

● VCC Operation at 3 V and 4.3 V

● 1.8-V Compatible Control-Pin Inputs

● IOFF Supports Partial Power-Down-Mode

●Operation

● Ron = 10 Ω Maximum

● ΔRon <0.35 Ω Typical

● Cio(ON) = 7 pF Typical

● Low Power Consumption (1 µA Maximum)

● ESD Performance Tested Per JESD 22

● 6000-V Human Body Model (HBM)

●(A114-B, Class II)

● 1000-V Charged-Device Model (C101)

● 250-V Machine Model (A115-A)

● –3-dB Bandwidth = 955 MHz Typical

● Packaged in 10-pin UQFN (1.4 mm × 1.8 mm)