● Low Differential Gain and Phase
●(DG = 0.64%, DP = 0.1 Degrees Typ)
● Wide Bandwidth (BW = 300 MHz Min)
● Low Crosstalk (XTALK = 63 dB Typ)
● Low Power Consumption
●(ICC = 3 µA Max)
● Bidirectional Data Flow With Near-Zero Propagation Delay
● Low ON-State Resistance (ron = 3 Typ)
● VCC Operating Range From 4.5 V to 5.5 V
● Ioff Supports Partial-Power-Down Mode Operation
● Data and Control Inputs Provide Undershoot Clamp Diode
● Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs
● Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
● ESD Performance Tested Per JESD 22
● 1000-V Charged-Device Model (C101)
● Suitable for Both RGB and Composite-Video Switching
●## DESCRIPTION/ORDERING INFORMATION
●The TS5V330 video switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (EN) input. When EN is low, the switch is enabled and the D port is connected to the S port. When EN is high, the switch is disabled and the high-impedance state exists between the D and S ports. The select (IN) input controls the data path of the multiplexer/demultiplexer.
●Low differential gain and phase make this switch ideal for composite and RGB video applications. This device has wide bandwidth and low crosstalk, making it suitable for high-frequency applications as well.
●This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. This switch maintains isolation during power off.
●To ensure the high-impedance state during power up or power down, EN should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
