TUSB211IRWBR Datasheet PDF - TI

●The TUSB211IRWBR is an USB 2.0 480Mbps High Speed Signal Conditioner designed to compensate for ISI signal loss in a transmission channel. The device has a patent-pending design which is agnostic to USB low speed (LS) and full speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB211. HS signals are compensated. Programmable signal gain permits fine tuning device performance to optimize High Speed signals at the connector. This helps to pass USB High Speed electrical compliance tests. The footprint of TUSB211 does not break the continuity of the DP/DM signal path. This permits risk free system design of a complete USB channel. In addition, TUSB211 is compatible with the USB On-The-Go (OTG) and Battery Charging (BC) protocols.

● Compatible with USB 2.0, OTG 2.0 and BC 1.2

● Support for LS, FS, HS signalling

● Active power consumption of 55mW (typical) with 3.3V single supply

● Selectable signal gain via external pull-down resistor

● Does not break DP, DM trace

● Scalable solution - Daisy chain device for high loss applications