UCC27200DDA Datasheet PDF - TI

●The UCC27200DDA is a high-frequency N-channel MOSFET Driver includes a 120V bootstrap diode and high-side and low-side drivers with independent inputs for maximum control flexibility. This allows for N-channel MOSFET control in half-bridge, full-bridge, two-switch forward and active clamp forward converters. The low-side and the high-side gate driver is independently controlled and matched to 1ns between the turn-ON and turnoff of each other. An on-chip bootstrap diode eliminates the external discrete diodes. Under-voltage lockout is provided for both the high-side and the low-side drivers forcing the outputs low if the drive voltage is below the specified threshold.

● Drives two N-channel MOSFETs in high-side and low-side configuration

● Negative voltage handling on HS (-5V)

● Greater than 1MHz of operation

● Under-voltage lockout for high-side and low-side driver

● On-chip 0.65V VF, 0.6R RD bootstrap diode

● 120V Maximum boot voltage

● 20V Maximum VDD voltage

● 8ns Rise and 7ns fall time with 1000pF load

● 1ns Delay matching

● Green product and no Sb/Br