UCC27210DDA Datasheet PDF - TI

●The UCC27210DDA is a high frequency High-/Low-Side Driver for use with half-bridge and full-bridge converters. Peak output pull-up and pull-down current has been increased to 4A source and 4A sink and pull-up and pull-down resistance have been reduced to 0.9R, thereby allowing for driving large power MOSFETs with minimized switching losses during the transition through the Miller Plateau of the MOSFET. The input structure is now able to directly handle -10VDC, which increases robustness and also allows direct interface to gate-drive transformers without using rectification diodes. The inputs are also independent of supply voltage and have a maximum rating of 20V. The switching node (HS pin) of the UCC2721x can handle -18V maximum which allows the high-side channel to be protected from inherent negative voltages caused parasitic inductance and stray capacitance.

● Symmetrical under-voltage lockout for high-side and low-side driver

● TTL or pseudo-CMOS compatible input version

● 120VDC Maximum boot voltage

● -10 to 20V Input pins can tolerate and is independent of supply voltage range

● 7.2ns Rise and 5.5ns fall time with 1000pF load

● 2ns Delay matching

● Green product and no Sb/Br