●The UCC27524D is a 2-channel 5A High-speed Low-side Gate Driver that can effectively drive MOSFET and IGBT power switches. Using a design that inherently minimizes shoot-through current, UCC27524 can deliver high-peak current pulses of up to 5A source and 5A sink into capacitive loads along with rail-to-rail drive capability and extremely small propagation delay (typically 13ns). In addition, the drivers feature matched internal propagation delays between the two channels. These delays are very well suited for applications requiring dual-gate drives with critical timing, such as synchronous rectifiers. This also enables connecting two channels in parallel to effectively increase current-drive capability or driving two switches in parallel with one input signal. The input pin thresholds are based on TTL and CMOS compatible low-voltage logic, which is fixed and independent of the VDD supply voltage. Wide hysteresis between the high and low thresholds offers excellent noise immunity.
● Industry-standard pinout
● Two independent gate-drive channels
● 5A Peak source and sink-drive current
● Independent-enable function for each output
● TTL and CMOS compatible logic threshold independent of supply voltage
● Hysteretic-logic thresholds for high noise immunity
● Inputs and enable pin-voltage levels not restricted by VDD pin bias supply voltage
● Outputs held low during VDD-UVLO
● Fast propagation delays (13ns typical)
● Fast rise and fall times (7ns and 6ns typical)
● 1ns Typical delay matching between two channels
● Two outputs are in parallel for higher drive current
● Outputs held low when inputs floating
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
Part 3D Model
