●The UCC28019AEVM is an evaluation module for UCC28019A continuous conduction mode (CCM) PFC controller. The UCC28019A is a 8 pin active power factor correction (PFC) controller uses the boost topology operating in CCM mode. This controller is suitable for systems in the 100W to 2KW range over a wide range universal ac line input. The UCC28019AEVM is 350W off line power factor correction boost converter providing a 390V regulated output at 0.9A of load current. The power factor correction converter accommodates an input voltage range of 85Vac to 265Vac and uses average current mode control at a fixed frequency of 65KHz. The evaluation module highlights the many benefits of using the UCC28019A continuous current mode PFC controller. The controller operates under average current mode control at a fixed frequency of 65KHz. Simple external current and voltage loop compensation, along with advanced protection features.
● 350W, 390V output
● Universal off line input voltage range
● Average current mode PWM control
● Fixed 65KHz oscillator frequency
● Cycle by cycle peak current limiting
● VCC under voltage lockout
● Voltage regulation open loop detection
● Output under voltage protection
● Enhanced dynamic response
● AC input brown out protection
●This device has limited built in ESD protection. The leads should be shorted together or device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
●High voltage levels are present on the evaluation module whenever it is energized. Proper precautions must be taken when working with the EVM.
