ULN2003V12DR Datasheet PDF - TI

●The ULN2003V12DR is a Low-power 7-channel Relay Driver features 7 low output impedance drivers that minimize on-chip power dissipation. When driving a typical 12V relay coil a ULN2003V12 will dissipate up to 12 times lower power than an equivalent ULN2003A. The ULN2003V12 supports 3.3 to 5V CMOS logic input interface thus making it compatible to a wide range of micro-controllers and other logic interfaces. It features an improved input interface that minimizes the input DC current drawn from the external drivers. The ULN2003V12 features an input RC snubber that greatly improves its performance in noisy operating conditions. The ULN2003V12 channel inputs feature an internal input pull-down resistor thus allowing input logic to be tri-stated. This relay driver provides flexibility of increasing current sink capability through combining several adjacent channels in parallel.

● 7-channel High current sink driver

● Supports up to 20V output pull-up voltage

● Supports wide range of low and high voltage relays and inductive coils

● Low output VOL of 0.6V (typical)

● Compatible to 3.3 and 5.0V micro-controllers and logic interface

● Internal free-wheeling diodes for inductive kick-back protection

● Input pull-down resistors allows tri-stating the input driver

● Input RC-snubber to eliminate spurious operation in noisy environment

● Low input and output leakage currents

● Easy to use parallel interface

● Green product and no Sb/Br

●IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.