Web Analytics
Part Datasheet Search > Interface ICs > HEF4051 Datasheet PDF
Images are for reference

HEF4051 Datasheet PDF

Part Series:
HEF4051 Series
Category:
Interface ICs
Description:
IC MUX/DEMUX 8X1 16SOIC
Updated Time: 2023/01/13 02:00:40 (UTC + 8)

HEF4051 Datasheet PDF Interface ICs

23 Pages
Nexperia
IC MUX/DEMUX 8X1 16SOIC
23 Pages
Nexperia
IC MUX/DEMUX 8X1 16SOIC
23 Pages
Nexperia
Analog Multiplexer Single 8:1 16Pin SO
23 Pages
NXP
Analog Multiplexer Single 8:1 16Pin PDIP T/R
23 Pages
NXP
4000B Series 3 to 15V 8CH Analog SMT Multiplexer/Demultiplexer - SOIC-16
23 Pages
NXP
Analog Multiplexer Single 8:1 16Pin PDIP
23 Pages
NXP
Analog Multiplexer Single 8:1 16Pin TSSOP T/R
23 Pages
NXP
NXP HEF4051BT,013 8:1 Analog Multiplexer/Demultiplexer IC, Single, 60Ω, 3V to 15V, SOIC-16
23 Pages
Nexperia
IC MUX/DEMUX 8CH 16SSOP
23 Pages
NXP
Analog Multiplexer Single 8:1 16Pin SSOP T/R
23 Pages
NXP
8Channel analog multiplexer/demultiplexer
23 Pages
NXP
Analog Multiplexer Single 8:1 16Pin SSOP Bulk
23 Pages
NXP
Ic Mux/Demux 8x1 16soic
23 Pages
Nexperia
IC MUX/DEMUX 8X1 16SOIC
17 Pages
Nexperia
IC MUX/DEMUX 8CH ANLG 16TSSOP
9 Pages
Philips
8Channel analogue multiplexer/demultiplexer

HEF4051BT,653 - Nexperia Specifications

TYPE
DESCRIPTION
Number of Pins
16 Pin
Case/Package
SOIC-16
Number of Outputs
1 Output
Supply Current
20 µA
Number of Circuits
1 Circuit
show more

HEF4051BT,653 - Nexperia Function Overview

The HEF4051BT is a 8-channel Analog Multiplexer/Demultiplexer with three address inputs (S1 to S3), an active low enable input (E\\), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). The device contains eight bidirectional analog switches, each with one side connected to an independent input/output (Y0 to Y7) and the other side connected to a common input/output (Z). With E\ low, one of the eight switches is selected (low-impedance on-state) by S1 to S3. With E\ high, all switches are in the high-impedance OFF-state, independent of S1 to S3. If break before make is needed, then it is necessary to use the enable input. VDD and VSS are the supply voltage connections for the digital control inputs (S1 to S3 and E\\). The VDD to VSS range is 3 to 15 V. The analog inputs/outputs (Y0 to Y7 and Z) can swing between VDD as a positive limit and VEE as a negative limit. VDD - VEE may not exceed 15V. Unused inputs must be connected to VDD, VSS or another input.
Fully static operation
Standardized symmetrical output characteristics
Complies with JEDEC standard JESD 13-B
show more
Part Datasheet PDF Search
Loading...
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.

Relate Parts