LT1076 Datasheet PDF

●The LT1076CT#PBF is a 2A monolithic bipolar step-down Switching Regulator requires only a few external parts for normal operation. The power switch, all oscillator and control circuitry, all current limit components are included on the chip. The topology is a classic positive "buck" configuration but several design innovations allow this device to be used as a positive-to-negative converter, a negative boost converter and as a flyback converter. The switch output is specified to swing 40V below ground, allowing the LT1076 to drive a tapped-inductor in the buck mode with output currents up to 10A. It uses a true analogue multiplier in the feedback loop. This makes the device respond nearly instantaneously to input voltage fluctuation and makes loop gain independent of input voltage. As a result, dynamic behaviour of the regulator is significantly improved over previous designs. On-chip pulse by pulse current limiting makes the LT1076 nearly bust-proof for output overloads or shorts.

● 2A Onboard switch

● Operates up to 60V input

● Greatly improved dynamic behaviour

● Only 8.5mA quiescent current

● Programmable current limit

● Micro power shutdown mode