MAX8212 Datasheet PDF

●The MAX8212CPA+ is a microprocessor voltage monitor with programmable voltage detection in 8 pin DIP package. This CMOS micropower voltage detector indicates microprocessors (µPs) power failures. It contains a comparator, a 1.5V band gap reference and an open-drain n-channel output driver. Two external resistors are used in conjunction with the internal reference to set the trip voltage to the desired level. A hysteresis output allows the user to apply positive feedback for noise-free output switching. The MAX8212 output turns on when a voltage greater than 1.5V at the threshold pin. It is not current limited and will typically sink 35mA. This device is a plug-in replacement for the bipolar ICL8211/ICL8212 in applications where the maximum supply voltage is less than 16.5V. It offers several performance advantages including reduced supply current, a tightly controlled band gap reference and more available current from the hysteresis output.

● Supply voltage range is 2V to 16.5V

● Operating temperature range from 0°C to 70°C

● Supply current is 5µA

● Threshold trip voltage range from 1.11V to 1.19V

● Quiescent current is 5µA

● ±40mV threshold accuracy (±3.5%)

● On-board hysteresis output