PIC16F1939 Datasheet PDF

●The PIC16F1939-I/PT is a 8-bit 40-pin Microcontroller with LCD driver featuring nanoWatt XLP technology. This device has a hardware stack memory 15-bit wide and 16 words deep. A stack overflow or underflow will set the appropriate bit (STKOVF or STKUNF) in the PCON register and if enabled will cause a software reset. There are two 16-bit file select registers (FSR). FSRs can access all file registers and program memory, which allows one data pointer for all memory. When an FSR points to program memory, there is one additional instruction cycle in instructions using INDF allows the data to be fetched.

● Enhanced mid-range core with 49 instruction, 16 stack levels

● Flash program memory with self read/write capability

● 96 LCD segment drive support

● Internal 32MHz oscillator

● Integrated capacitive mTouch sensing module

● Integrated temperature indicator

● MI²C, SPI, EUSART with auto baud

● 3 ECCP and 2 CCP (enhanced/capture compare PWM)

● Comparators with selectable voltage reference

● 14-channel 10-bit ADC with voltage reference

● 25mA Source/sink current I/O

● Four 8-bit timers (TMR0/TMR2/TMR4/TMR6)

● One 16-bit Timer (TMR1)

● Extended watchdog timer (EWDT)

● Enhanced power-on/off-reset

● Brown-out reset (BOR)

● In-Circuit Serial Programming™ (ICSP™)

●ESD sensitive device, take proper precaution while handling the device.