Web Analytics
Part Datasheet Search > FET Drivers > TC4422 Datasheet PDF
Images are for reference

TC4422 Datasheet PDF

Part Series:
TC4422 Series
Category:
FET Drivers
Description:
Driver 10A 1Out Lo Side Non-Inv Automotive 8Pin PDIP Tube
Updated Time: 2023/01/13 01:47:57 (UTC + 8)

TC4422 FET Drivers Datasheet PDF

TC4422 Datasheet PDF FET Drivers

22 Pages
Microchip
9A BUF OR INV BASED MOSFET DRIVER, PDIP8, 0.3INCH, PLASTIC, MS-001, DIP-8
22 Pages
Microchip
MOSFET DRVR 9A 1Out Lo Side Non-Inv 8Pin PDIP Tube
22 Pages
Microchip
TC4422AVAT, MOSFET Power Driver 10A, 4.5 to 18V, Non-Inverting, 5Pin TO-220
22 Pages
Microchip
9A Sngl MOSFET Drvr8 SOIC 3.9mm(0.15in) T/R
22 Pages
Microchip
TC4422A Series 10A 18 Vmax 2Ω Low Side Non Inverting MOSFET Driver - DFN-8
22 Pages
Microchip
MOSFET DRVR 10A 1Out Lo Side Non-Inv 8Pin DFN-S EP T/R
20 Pages
Microchip
MOSFET DRVR 9A 1Out Lo Side Non-Inv 5Pin(5+Tab) TO-220 Tube
20 Pages
Microchip
MICROCHIP TC4422MJA MOSFET Driver, 2Outputs, Low Side, 4.5V-18V supply, 0.375A and 1.4Ω output, DIP-8
20 Pages
Microchip
MOSFET DRVR 9A 1Out Lo Side Non-Inv 8Pin DFN-S EP
19 Pages
Microchip
MOSFET DRVR 9A 1Out Lo Side Non-Inv 8Pin SOIJ T/R
19 Pages
Microchip
MOSFET DRVR 9A 1Out Lo Side Non-Inv 8Pin DFN-S EP T/R
18 Pages
Microchip
MOSFET DRVR 9A 1Out Lo Side Non-Inv 5Pin(5+Tab) TO-220 Tube
18 Pages
Microchip
MOSFET DRVR 9A 1Out Lo Side Non-Inv 8Pin DFN-S EP T/R
18 Pages
Microchip
MOSFET DRVR 9A 1Out Lo Side Non-Inv 8Pin DFN-S EP Tube
18 Pages
Microchip
9A Sngl MOSFET Drvr

TC4422AVPA - Microchip Specifications

TYPE
DESCRIPTION
Mounting Style
Through Hole
Number of Pins
8 Pin
Supply Voltage (DC)
4.50V (min)
Operating Voltage
4.5V ~ 18V
Case/Package
PDIP-8
show more

TC4422AVPA - Microchip Function Overview

The TC4422AVPA is a non-inverting high-speed MOSFET Driver capable of driving large MOSFETs and insulated gate bipolar transistors (IGBTs). The TC4421A has matched output rise and fall times, as well as matched leading and falling-edge propagation delay times. The TC4421A device also has very low cross-conduction current, reducing the overall power dissipation of the device. This device is essentially immune to any form of upset, except direct over-voltage or over-dissipation. It cannot be latched under any conditions within their power and voltage ratings. This part is not subject to damage or improper operation when up to 5V of ground bounce is present on their ground terminals. It can accept, without damage or logic upset, more than 1A inductive current of either polarity being forced back into their outputs. In addition, 300mV of hysteresis is built into the input, providing noise immunity and allowing the device to be driven from slowly rising or falling waveforms.
Low shoot-through/cross-conduction current in output stage
Matched fast rise and fall times
Matched short propagation delays - 42ns Typical
Latch-up protected - Will withstand 1.5A output reverse current
Pin-compatible with the TC4420/TC4429 and TC4421/TC4422 MOSFET drivers
10ATypical high peak output current
1.2R Typical low output impedance
show more
Part Datasheet PDF Search
Loading...
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.

Relate Parts