Web Analytics
Part Datasheet Search > FET Drivers > TC4427 Application Note
Images are for reference

TC4427 Application Note

Part Series:
TC4427 Series
Category:
FET Drivers
Description:
TC4427EOA, Dual MOSFET Power Driver 1.5A, 4.5 to 18V, Non-Inverting, 8Pin SOIC
Updated Time: 2023/01/13 01:27:02 (UTC + 8)

TC4427 Application Note FET Drivers

18 Pages
Microchip
TC4427COA, Dual MOSFET Power Driver 1.5A, 4.5 to 18V, Non-Inverting, 8Pin SOIC
18 Pages
Microchip
TC4427CPA; Dual MOSFET Power Driver 1.5A; 4.5 to 18V; Non-Inverting; 8Pin PDIP
18 Pages
Microchip
MOSFET DRVR 1.5A 2Out Lo Side Non-Inv 8Pin MSOP T/R
18 Pages
Microchip
TC4427ACOA, Dual MOSFET Power Driver 1.5A, 4.5 to 18V, Non-Inverting, 8Pin SOIC
18 Pages
Microchip
MOSFET DRVR 1.5A 2Out Lo Side Non-Inv 8Pin SOIC N Tube
18 Pages
Microchip
TC4427ACPA, Dual MOSFET Power Driver 1.5A, 4.5 to 18V, Non-Inverting, 8Pin PDIP

TC4427EOA - Microchip Specifications

TYPE
DESCRIPTION
Mounting Style
Surface Mount
Number of Pins
8 Pin
Supply Voltage (DC)
4.50V (min)
Operating Voltage
4.5V ~ 18V
Case/Package
SOIC-8
show more

TC4427EOA - Microchip Function Overview

The TC4427EOA is a 1.5A dual high-speed Power MOSFET Driver. The TC4427 device have matched rise and fall times when charging and discharging the gate of a MOSFET. This device is highly latch-up resistant under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the ground pin. They can accept, without damage or logic upset, up to 500mA of reverse current (of either polarity) being forced back into their outputs. All terminals are fully protected against Electrostatic Discharge (ESD) up to 2.0kV. The TC4427 MOSFET driver can easily charge/discharge 1000pF gate capacitances in under 30ns. This device provide low enough impedances in both the on and off states to ensure the MOSFET"s intended state is not affected, even by large transients.
High capacitive load drive capability of 1000pF in 25ns
Consistent delay times with changes in supply voltage
7R at 25°C Typical low output impedance
Latch-up protection - Will withstand >0.5A reverse current and down to -5V
Input withstands negative inputs
ESD protected of 2kV HBM
ESD sensitive device, take proper precaution while handling the device.
show more
Part Datasheet PDF Search
Loading...
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.

Relate Parts