●The ADV7180 series 10-bit 4x Oversampling SDTV Video Decoder which automatically detects and converts standard analog baseband television signals compatible with worldwide NTSC, PAL and SECAM standards into 4:2:2 component video data compatible with the 8-bit ITU-R BT.656 interface standard. External HS, VS and FIELD signals provide timing references for LCD controllers and other video ASICs, if required. Three analog video input channels accept standard composite, S-Video or component video signals, supporting a wide range of consumer video sources. AGC and clamp-restore circuitry allow an input video signal peak-to-peak range to 1.0V. The line-locked clock output allows the output data rate, timing signals and output clock signals to be synchronous, asynchronous or line locked even with ±5% line length variation. Mini-TBC functionality provided by adaptive digital line length tracking, signal processing and enhanced FIFO management.
● 3 Video input channels with on-chip antialiasing filter
● CVBS (composite), Y/C (S-Video) and YPrPb (component) video input support
● 5-line Adaptive comb filters and CTI/DNR video enhancement
● Integrated AGC with adaptive peak white mode
● Macrovision copy protection detection
● NTSC/PAL/SECAM Autodetection
● 8-bit ITU-R BT.656 YCrCb 4:2:2 output and HS, VS and FIELD
● 1V Analog input signal range
● Full-featured VBI data slicer with teletext support (WST)
● Power-down mode and ultralow sleep mode current
● 2-wire Serial MPU interface (I²C compatible)
