●Product Details
●The AD5750/AD5750-1/AD5750-2 are single-channel, low cost, precision voltage/current output drivers with hardware- or software-programmable output ranges. The software ranges are configured via an SPI-/MICROWIRE™-compatible serial interface. The AD5750/AD5750-1/AD5750-2 target applications in PLC and industrial process control. The analog input to the AD5750/ AD5750-1/AD5750-2 is provided from a low voltage, single-supply digital-to-analog converter (DAC) and is internally conditioned to provide the desired output current/voltage range. Analog input ranges available are 0 V to 2.5 V (AD5750-1/AD5750-2) or 0 V to 4.096 V (AD5750).
●The output current range is programmable across five current ranges: 4 mA to 20 mA, 0 mA to 20 mA or 0 mA to 24 mA, ±20 mA, and ±24 mA. An overrange of 2% is available on the unipolar current ranges.
●Voltage output is provided from a separate pin that can be configured to provide 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V output ranges. An overrange of 20% is available on the voltage ranges.
●Analog outputs are short-circuit and open-circuit protected and can drive capacitive loads of 1 μF and inductive loads of 0.1 H.
●The device is specified to operate with a power supply range from ±12 V to ±24 V. Output loop compliance is 0 V to AVDD − 2.75 V.
●The flexible serial interface is SPI and MICROWIRE compatible and can be operated in 3-wire mode to minimize the digital isolation required in isolated applications. The interface also features an optional PEC error checking feature using CRC-8 error checking, useful in industrial environments where data communication corruption can occur.
●The device also includes a power-on reset function, ensuring that the device powers up in a known state (0 V or tristate), and an asynchronous CLEAR pin that sets the outputs to zero scale/midscale voltage output or the low end of the selected current range.
●An HW SELECT pin is used to configure the part for hardware or software mode on power-up.
●Applications
● Process control
● Actuator control
● PLCs
●### Features and Benefits
● Current output ranges:
●4 mA to 20 mA, 0 mA to 20 mA or 0 mA to 24 mA, ±20 mA, and ±24 mA
●±0.03% FSR total unadjusted error (TUE)
●±5 ppm/°C typical output drift
● Voltage output ranges:
●0 V to 5 V, 0 V to 10 V, ±5 V, and ±10 V, with 20% overrange
●±0.02% FSR TUE
●±3 ppm/°C typical output drift
● Flexible serial digital interface
● On-chip output fault detection
● PEC error checking
● Asynchronous CLEAR function
● Flexible power-up condition to 0 V or tristate
● Power supply range
●AVDD: +12 V (± 10%) to +24 V (± 10%)
●AVSS: −12 V (± 10%) to −24 V (± 10%)
● Output loop compliance to AVDD − 2.75 V
● Temperature range: −40°C to +105°C
● 32-lead, 5 mm × 5 mm LFCSP package
Part 3D Model
